If you’ve started shopping around for kitchen cabinets in Nigeria, you’ve probably noticed something frustrating: nobody gives you a straight answer on price. Ask five different fabricators and you’ll get five different numbers, and none of them explain why.
The truth is, the price of kitchen cabinets in Nigeria isn’t random; it just depends on a handful of factors that most companies don’t bother breaking down for customers. Material, size, whether it’s custom-built or ready-made, even which city you’re in- all of it moves the price up or down. This guide walks through what you’re actually paying for, so that by the time you sit down with a fabricator, you already know roughly what to expect.
How much do kitchen cabinets cost in Nigeria?
For a small kitchen, think a studio apartment or a compact flat, you’re generally looking at somewhere between ₦350,000 and ₦900,000. A standard kitchen in a typical 2 to 3 bedroom home tends to fall between ₦900,000 and ₦2,000,000. If you’ve got a bigger duplex-style kitchen, budget anywhere from ₦2,000,000 up to ₦5,000,000, and for fully custom, high-end kitchens, prices can climb past ₦5,000,000 all the way to ₦15,000,000 or more.
Worth noting: those numbers usually only cover the cabinets themselves, the base units and wall units. Your countertop, sink, and installation are almost always billed separately, which is exactly why a lot of people end up spending more than they planned. We’ll get to that further down.
Kitchen cabinet prices in Nigeria by material
This is honestly the biggest factor in your final cost, more than anything else.
MDF is the cheapest route, usually ₦45,000 to ₦90,000 per linear meter. It looks smooth and clean, but it’s not naturally great with humidity, so it needs proper sealing if it’s going to hold up in a Nigerian kitchen.
Plywood sits a bit higher, around ₦60,000 to ₦120,000 per meter, but it’s tougher and handles our climate noticeably better. This is probably the most common middle-ground choice for homeowners who want something durable without going premium.
PVC or wrapped cabinets run about ₦55,000 to ₦100,000 per meter, and they’re basically waterproof, which makes them a smart pick if your kitchen deals with a lot of moisture or heat.
Solid wood is where things get expensive, ₦120,000 to ₦250,000+ per meter, but it lasts, ages well, and adds real value to a home. Just make sure it’s properly treated; otherwise termites and humidity will get to it eventually.
Then there’s stainless steel, which you’ll mostly see in commercial kitchens or serious high-end homes. Expect ₦150,000 to ₦300,000+ per meter. It’s practically indestructible and easy to keep clean, but it’s not a budget option by any stretch.
Custom kitchen cabinets vs ready-made: which costs more?
Ready-made cabinets are almost always the cheaper option, and they go in fast, which is why people on a tighter budget or timeline usually lean that way.
Custom kitchen cabinets in Nigeria cost more, typically 20 to 50 percent more, because someone actually comes to measure your space, design around your layout, and build to fit. If your kitchen has an awkward shape or you need very specific storage, that extra cost tends to pay for itself. A lot of Nigerian apartments have tight or oddly shaped kitchens, so custom work often makes better use of the space than anything off the shelf.
Other things quietly affecting your price
Where you live matters more than people expect. Lagos, Abuja, and Port Harcourt tend to run higher than smaller cities, mostly down to logistics and demand.
The hardware you choose, hinges, drawer slides, handles, adds up too. Soft-close hinges and quality slides cost more upfront but save you from replacing broken ones two years later.
Your countertop choice can swing the total significantly. Granite, quartz, and marble are all priced very differently.
Installation labor is its own line item, generally ₦50,000 to ₦300,000 depending on how big and complicated the job is.
And design extras, kitchen islands, open shelving, built-in appliances- all push the number higher too.
What a real kitchen might cost, start to finish
Say you’re doing a mid-sized kitchen in plywood. Here’s roughly how it breaks down: cabinets themselves land somewhere between ₦900,000 and ₦1,500,000. A granite countertop adds ₦150,000 to ₦400,000. Sink and fittings run ₦40,000 to ₦120,000. Installation adds another ₦80,000 to ₦200,000.
All in, you’re probably looking at somewhere between ₦1,170,000 and ₦2,220,000 for the whole kitchen. Obviously this shifts depending on your vendor and exactly what you choose, but it gives you a realistic ballpark instead of guessing blind.
Getting the best deal without getting burned
Don’t take the first quote you get. Prices genuinely vary a lot between fabricators, so get at least two or three before deciding anything.
Ask about warranty upfront, decent companies will back their materials and hardware for a year or two, sometimes three.
If you can, go see material samples in person rather than trusting photos. Humidity resistance is something you notice in real life, not on a screen.
Cheaper materials can end up costing more later if they swell, peel, or warp within a couple of years, so factor that into your decision, not just the sticker price.
And ideally, find a company that handles both the design and the installation. It cuts down on miscommunication and hidden costs between the people who build the cabinets and the people who fit them.
Frequently asked questions about kitchen cabinet prices in Nigeria
Does installation cost extra on top of the cabinets? Yes, almost always. Expect ₦50,000 to ₦300,000 depending on the size and complexity of the job.
What’s the cheapest kitchen cabinet material in Nigeria? MDF is generally the most affordable, though PVC gives you a good balance between price and moisture resistance if that’s a concern.
Is custom really worth paying more for? If your kitchen is a standard shape and size, probably not necessary. But if you’re working with an awkward layout or a small space, custom cabinets usually make far better use of what you’ve got.
How long should kitchen cabinets last in Nigeria? With decent materials, plywood, PVC, or properly treated solid wood, and correct sealing, you’re looking at 10 to 15 years even with Nigeria’s humidity.
Final thoughts
At the end of the day, every range in this guide is just that, a range. Your actual number depends on the size of your kitchen, the material you go with, and how much customization you want. The best way to stop guessing is to get an actual set of eyes on your space.
That’s where Marsand Bespoke Joinery comes in. We design and install kitchen cabinets across Nigeria, tailored to your kitchen, your budget, and Nigeria’s climate, so you’re not stuck with cabinets that swell, peel, or fall apart in two years.
Ready to get your exact price? Get a free quote from Marsand Bespoke Joinery, and we’ll walk you through your options, no pressure, no guesswork, just a real number for your kitchen.
